Strip brushes are used to clean punch plates by removing concrete residues left during the moulding of products.
The cleaning element can be made of:
- Polypropylene fibre PP 2x3 mm, 1.6 mm, 1.2 mm
- Polyamide fibre PA6 Ø1.6 mm, Ø1mm, crimped or smooth
- Spring steel wire
- Flat bar 0.25x2mm
- Waved round wire of spring steel Ø0.5mm
- Round wire of spring steel Ø0.6-1.1mm
- Combinations of the above-mentioned materials.
We tailor the working width and height of strip brushes to the customer's request. The brush length is up t 1650mm and the working section height is up to 250mm.
We shape brushes to match the stone shapes such as water ducts or hollow bricks.
Brushes for Nostalit are 60 or 90 mm high and can be bent at the angle of 30°.
Strip brushes have a very good quality and are manufactured at short notice.
Zdjęcia przedstawiają nasze realizacje.